Command Line Reference Guide

Control and Monitoring | 141
Usage
Information
This command is not available when the peer RPMs are running different FTOS releases.
ssh-peer-stack-unit
Open an SSH connection to the peer RPM.
Syntax
ssh-peer-stack-unit [-l username]
Parameters
Defaults
Not configured.
Command Modes
EXEC
EXEC Privilege
Command
History
telnet
c e s
Connect through Telnet to a server.
Syntax
telnet {host | ip-address | ipv6-address prefix-length | vrf vrf instance name } [/source-interface]
Parameters
-l username (OPTIONAL) Enter the keyword -l followed by your user name.
Default: The user name associated with the terminal
Version 8.3.3.4 Introduced on S60
host
Enter the name of a server.
ip-address
Enter the IPv4 address in dotted decimal format of the server.
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in
the
/x format.
Range: /0 to /128
Note: The
:: notation specifies successive hexadecimal fields of zeros