Command Line Reference Guide

Control and Monitoring | 131
show system (S-Series)
s
Display the current status of all stack members or a specific member.
Syntax
show system [brief | stack-unit unit-id | stack-ports {status | topology}]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Figure 4-57 shows the output from the show system brief command.
Figure 4-56 shows the output from the show system stack-unit command on a non-S60 system.
Figure 4-57shows the output from the show system stack-unit command on an S60.
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of system
information.
stack-unit unit-id (OPTIONAL) Enter the keyword stack-unit followed by the stack
member ID for information on that stack member.
Unit ID range:
S60: 0-11
all other S-Series: 0-7
stack-ports status |
topology
(OPTIONAL) Enter the keyword stack-ports for information on the
status or topology of the S60 stack ports.
Note: THis option applies to the S60 only.
Version 8.3.3.1 Introduced on the S60.
Version 7.8.1.0 Modified output: Boot Flash field will display code level for boot code 2.8.1.1 and newer,
while older boot codes are displayed as "Present".
Version 7.7.1.0 Modified output: Added Master Priority field.
Version 7.6.1.0 Introduced for S-Series switches