Command Line Reference Guide

S-Series Debugging and Diagnostics | 1081
Parameters
Command Mode
EXEC
EXEC Privilege
Command
History
Related
Commands
show hardware system-flow
s
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow layer2 stack-unit idport-set 0-1 [counters]
Parameters
Defaults
No default behavior
Command Modes
EXEC Privilege
Command
History
stack-unit stack-unit
{command-option}
Enter the keyword stack-unit to select a particular stack member and
then enter one of the following command options to display a
collection of data based on the option entered.
Unit ID range:
S60 range: 0 - 11
buffering unit
Select the stack member to be the buffering unit.
S60 range: 0 - 11
execute-shell-cmd
command name
Enter the keyword execute-shell-cmd to execute a shell commands:
no-more
Enter this command to stop collecting the buffer usage information for
multicast traffic enabled by the shell command.
queue-stats multicast
cos-queue
queue number
Enter the keyword queue-stats multicast cos-queue to collect the
multicast cos values for each of the 8 virtual queues.
Version 8.3.3.8 Introduced on the S60.
queue backplane multicast
Enable buffering for all multicast traffic on the buffering unit.
acl | qos
For the selected stack member and stack member port-pipe, display which
system flow entry the packet hits and what queue the packet takes as it dumps
the raw system flow tables.
stack-unit id Enter the keyword stack-unit to select a stack member ID.
Unit ID range:
S60: 0-11
all other S-Series: 0-7
port-set 0-1
[counters]
Enter the keyword port-set with a port-pipe number — 0 or 1. The S25 models of
the S-Series have only port-pipe 0.
(OPTIONAL) Enter the keyword
counters to display hit counters for the selected
ACL or QoS option.
Version 8.3.3.1 Introduced on the S60.
Version 7.8.1.0 Introduced on S-Series