Command Line Reference Guide

S-Series Stacking Commands | 1001
Related
Commands
show system stack-ports
s
Display information about the stacking ports on all switches in the S-Series stack.
Syntax
show system stack-ports [status | topology]
Parameters
Defaults
No default behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 40-3. show system stack-ports Command Example
Example
Figure 40-4. show system stack-ports status Command Example
redundancy disable-auto-reboot Prevent the system from auto-rebooting if it fails.
status (OPTIONAL) Enter the keyword status to display the command output without the
Connection field.
topology (OPTIONAL) Enter the keyword topology to limit the table to just the Interface and
Connection fields.
Version 8.3.3.4 Introduced on S60
Version 7.7.1.0 Introduced on S-Series
Force10# show system stack-ports
Topology: Ring
Interface Connection Link Speed Admin Link
(Gb/s) Status Status
----------------------------------------------------------------------------
0/49 1/49 12 up up
0/50 12 up down
0/51 2/49 24 up up
1/49 0/49 12 up up
1/50 2/51 12 up up
2/49 0/51 24 up up
2/51 1/50 12 up up
2/52 12 up down
Force10#
Force10# show system stack-ports status
Topology: Ring
Interface Link Speed Admin Link
(Gb/s) Status Status
-------------------------------------------------
0/49 12 up up
0/50 12 up down
0/51 24 up up
1/49 12 up up
1/50 12 up up
2/49 24 up up
2/51 12 up up
2/52 12 up down
Force10#