Reference Guide

70 | Control and Monitoring
www.dell.com | support.dell.com
Enter no banner login keyboard-interactive to automatically go to the banner message prompt
(does not require a carriage return).
Parameters
Defaults
No banner is configured and the CR is required when creating a banner.
Command Modes
CONFIGURATION
Command
History
Usage
Information
A login banner message is displayed only in EXEC Privilege mode after entering the enable
command followed by the password. These banners are not displayed to users in EXEC mode.
Related
Commands
keyboard-interactive Enter this keyword to require a carriage return (CR) to get the message banner
prompt.
c Enter a delineator character to specify the limits of the text banner. In Figure 4-1,
the % character is the delineator character.
line Enter a text string for your text banner message ending the message with your
delineator.
In the example in Figure 4-1, the delineator is a percent character (%).
Ranges:
• maximum of 50 lines
• up to 255 characters per line
Version 8.3.5.0 Introduced on the S55.
Version 8.2.1.0
Introduced
keyboard-interactive keyword
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
banner exec Sets a banner to be displayed when you enter EXEC Privilege mode.
banner motd Sets a Message of the Day banner.