Reference Guide

Link Layer Detection Protocol (LLDP) | 651
advertise management-tlv (Interface)
c e s Z
Advertise management TLVs (Type, Length, Value) to the specified interface.
Syntax
advertise management-tlv {management-address | system-capabilities |
system-description| system-name
}
To remove advertised management TLVs, use the no advertise management-tlv
{management-address | system-capabilities | system-description | system-name} command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-interface-lldp)
Command
History
Usage
Information
All three command options — system-capabilities, system-description, and system-name —
-can be invoked individually or together, in any sequence.
clear lldp counters
c e s
Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical
interface.
Syntax
clear lldp counters interface
Parameters
management-address Enter the keyword management-address to advertise the management
IP address TLVs to the specified interface.
system-capabilities Enter the keyword system-capabilities to advertise the system
capabilities TLVs to the specified interface.
system-description Enter the keyword system-description to advertise the system
description TLVs to the specified interface.
system-name Enter the keyword system-name to advertise the system name TLVs to
the specified interface.
Version 8.3.3.9 Introduced on the S60
Version 8.3.5.5 Introduced on S55
Version 9.1.(0.0) Introduced on the Z9000 and S4810
interface
Enter the following keywords and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/
port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitEthernet followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet
followed by the slot/port information.