Reference Guide

650 | Link Layer Detection Protocol (LLDP)
www.dell.com | support.dell.com
advertise management-tlv
c e s Z
Advertise management TLVs (Type, Length, Value).
Syntax
advertise management-tlv {management-address | system-capabilities |
system-description| system-name
}
To remove advertised management TLVs, use the no advertise management-tlv
{management-address | system-capabilities | system-description | system-name} command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-lldp)
Command
History
Usage
Information
The command options — management-address, system-capabilities, system-description, and
system-name
—-can be invoked individually or together, in any sequence.
management-address Enter the keyword management-address to advertise the management
IP address TLVs to the LLDP peer.
system-capabilities Enter the keyword system-capabilities to advertise the system
capabilities TLVs to the LLDP peer.
system-description Enter the keyword system-description to advertise the system
description TLVs to the LLDP peer.
system-name Enter the keyword system-name to advertise the system name TLVs to
the LLDP peer.
Version 8.3.3.9 Introduced on the S60
Version 8.3.5.5 Introduced on the S55
Version 9.1.(0.0) Modified to support management-address parameter
Version 8.3.11.1 Introduced on the Z9000
Version 8.3.7.0 Introduced on the S4810
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series