Reference Guide

IPv4 Routing | 545
Related
Commands
show ip fib stack-unit
s
View all Forwarding Information Base (FIB) entries.
Syntax
show ip fib stack-unit id [ip-address [mask] [longer-prefixes] | summary]
Parameters
Command Mode
EXEC
EXEC Privilege
Command
History
Example
Figure 15-14. show ip fib linecard Command Example
Port Displays the egress-port information.
VId Displays the VLAN ID. If no VLAN is assigned, zero (0) is listed.
Index Displays the internal interface number.
EC Displays the number of ECMP paths.
Table 15-10. show ip fib linecard Command Example Fields
Field Description
clear ip fib stackunit Clear FIB entries on a specified line card.
id
Enter the S-Series stack unit ID.Unit ID range:
S55: 0-11
all other S-Series: 0-7
ip-address mask
(OPTIONAL) Enter the IP address of the network destination to view only
information on that destination.
Enter the IP address in dotted decimal format (A.B.C.D). You must enter the mask in
slash prefix format (/X).
longer-prefixes (OPTIONAL) Enter the keyword longer-prefixes to view all routes with a
common prefix.
summary (OPTIONAL) Enter the keyword summary to view the total number of prefixes in
the FIB.
Version 8.3.5.0 Introduced on the S55.
Version 7.7.1.0 Modified: Added support for up to seven stack members.
Version 7.6.1.0 Introduced on S-Series
FTOS#show ip fib stack-unit 0
Destination Gateway First-Hop Mac-Addr Port VId EC
------------------ --------------------------- ----------------- ------------------- -------- ----- --
10.10.10.10/32 Direct, Nu 0 0.0.0.0 00:00:00:00:00:00 BLK HOLE 0 0
FTOS>