Reference Guide

Interfaces | 459
Figure 14-12 is an example of a single range bulk configuration.
Example
Figure 14-12. Single Range Bulk Configuration
Figure 14-13 shows how to use commas to add different interface types to the range enabling all
Gigabit Ethernet interfaces in the range 5/1 to 5/23 and both Ten Gigabit Ethernet interfaces 1/1 and 1/
2.
Example
Figure 14-13. Multiple Range Bulk Configuration Gigabit Ethernet and Ten Gigabit
Ethernet
Figure 14-14 shows how to use commas to add SONET, VLAN, and port-channel interfaces to the
range.
Example
Figure 14-14. Multiple Range Bulk Configuration with SONET, VLAN, and port channel
Related
Commands
interface range macro (define)
c e s
Defines a macro for an interface range and then saves the macro in the running configuration.
Syntax
define interface range macro name interface, interface, ...
FTOS(config)# interface range gigabitethernet 5/1 - 23
FTOS(config-if-range)# no shutdown
FTOS(config-if-range)#
FTOS(config-if)# interface range gigabitethernet 5/1 - 23, tengigabitethernet 1/1 - 2
FTOS(config-if-range)# no shutdown
FTOS(config-if-range)#
FTOS(config-if)# interface range gigabitethernet 5/1 - 23, tengigabitethernet 1/1 – 2,
Vlan 2 – 100 , Port 1 – 25
FTOS(config-if-range)# no shutdown
FTOS(config-if-range)#
interface port-channel Configure a port channel group.
interface vlan Configure a VLAN interface.
show config (from INTERFACE
RANGE mode)
Show the bulk configuration interfaces.
show range Show the bulk configuration ranges.
interface range macro (define) Define a macro for an interface-range.