Reference Guide

30 | File Management
www.dell.com | support.dell.com
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Usage
Information
To display these changes in the show bootvar command output, you must save the running
configuration to the startup configuration (using the copy command) and reload system.
Related
Commands
boot system gateway
c e
Specify the IP address of the default next-hop gateway for the management subnet.
Syntax
boot system gateway ip-address
To delete a gateway configuration, enter no boot system gateway.
Parameters
Command Modes
CONFIGURATION
Usage
Information
Saving the address to the startup configuration file preserves the address in NVRAM in case the startup
configuration file is deleted.
Command
History
Related
Commands
gateway
Enter the IP address of the default next-hop gateway for the management subnet
stack-unit
Enter the stack-unit number for the master switch.
ip-address
Enter an IP address in dotted decimal format.
0-11, all
Stack-unit number
default
Enter the default keyword to use the primary FTOS image.
primary
Enter the primary keyword to use the primary FTOS image.
secondary
Enter the secondary keyword to use the primary FTOS image.
tftp: Enter TFTP: to retrieve the image from a TFTP server.
tftp://hostip/filepath
A: | B:
Enter A: or B: to boot one of the system partitions.
Version 8.3.5.0 Introduced on the S55
boot system gateway Specify the IP address of the default next-hop gateway for the management
subnet.
ip-address
Enter an IP address in dotted decimal format.
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
change bootflash-image Change the primary, secondary, or default boot image configuration.