Reference Guide

134 | Control and Monitoring
www.dell.com | support.dell.com
show processes switch-utilization
e
Show switch fabric utilization.
Syntax
show processes switch-utilization
Command Mode
EXEC
EXEC Privilege
Command
History
Example
Figure 4-51. Command Example: show processes switch-utilization
Usage
Information
An asterisk ( * ) in the output indicates a legacy card that is not support by the show processes
switch-utilization
command.
show rpm
c e
Show the current RPM status.
Syntax
show rpm [number [brief] | all]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Version 8.1.1.0 Introduced on E-Series ExaScale
E-Series original Command
FTOS#show processes switch-utilization
Switch fabric utilization 5Sec 1Min 5Min
------------------------------------------------------
3% 3% 3%
number
(OPTIONAL) Enter either zero (0) or 1 for the RPM.
all
(OPTIONAL) Enter the keyword all to view a table with information on all present RPMs.
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of RPM information.
Version 8.3.5.3 Updated to support PPID on the S55
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.5.1.0 Introduced on C-Series
E-Series original Command