Command Line Reference Guide

994 | SNMP and Syslog
www.dell.com | support.dell.com
Command Modes
CONFIGURATION
Command
History
Related
Commands
logging buffered
c e s
Enable logging and specify which messages are logged to an internal buffer. By default, all messages
are logged to the internal buffer.
Syntax
logging buffered [level] [size]
To return to the default values, enter default logging buffered. To disable logging stored to an
internal buffer, enter no logging buffered.
Parameters
Defaults
level = 7; size = 40960 bytes
Command Modes
CONFIGURATION
Command
History
Usage
Information
When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size
does not affect messages stored in the buffer.
Related
Commands
Version 8.3.5.0 Introduced on S55
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
logging on Enables the logging asynchronously to logging buffer, console, Syslog server, and
terminal lines.
logging trap Enables logging to the Syslog server based on severity.
level
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following
equivalent words: emergencies, alerts, critical, errors, warnings, notifications,
informational, or debugging.
Default: 7 or debugging.
size
(OPTIONAL) Indicate the size, in bytes, of the logging buffer. The number of
messages buffered depends on the size of each message.
Range: 40960 to 524288.
Default: 40960 bytes.
Version 8.3.5.0 Introduced on S55
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
clear logging Clear the logging buffer.
default logging buffered Returns the logging buffered parameters to the default setting.
show logging Display the logging setting and system messages in the internal buffer.