Command Line Reference Guide

SNMP and Syslog | 993
default logging monitor
c e s
Return to the default settings for messages logged to the terminal.
Syntax
default logging monitor
Defaults
level = 7 or debugging
Command Modes
CONFIGURATION
Command
History
Related
Commands
default logging trap
c e s
Return to the default settings for logging messages to the Syslog servers.
Syntax
default logging trap
Defaults
level = 6 or informational
Command Modes
CONFIGURATION
Command
History
Related
Commands
logging
c e s
Configure an IP address or host name of a Syslog server where logging messages will be sent.
Syntax
logging {ip-address | hostname}
To disable logging, enter no logging.
Parameters
Defaults
Disabled
Version 8.3.5.0 Introduced on S55
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
logging monitor Set the logging monitor parameters.
terminal monitor Send system messages to the terminal/monitor.
Version 8.3.5.0 Introduced on S55
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
logging trap Limit messages logged to the Syslog servers based on severity.
ip-address
Enter the IP address in dotted decimal format.
hostname
Enter the name of a host already configured and recognized by the switch.