Command Line Reference Guide

942 | Security
www.dell.com | support.dell.com
Example
Figure 36-5. show dot1x interface command Example
SSH Server and SCP Commands
FTOS supports SSH Protocol versions 1.5 and 2.0. Secure Shell (SSH) is a protocol for
secure remote login over an insecure network. SSH sessions are encrypted and use
authentication.
• crypto key generate
• debug ip ssh
• ip scp topdir
• ip ssh authentication-retries
• ip ssh connection-rate-limit
• ip ssh hostbased-authentication
• ip ssh key-size
• ip ssh password-authentication
• ip ssh pub-key-file
• ip ssh rhostsfile
• ip ssh rsa-authentication (Config)
• ip ssh rsa-authentication (EXEC)
• ip ssh server
• show crypto
• show ip ssh
• show ip ssh client-pub-keys
• show ip ssh rsa-authentication
• ssh
Force10#show dot1x int Gi 2/32
802.1x information on Gi 2/32:
-----------------------------
Dot1x Status: Enable
Port Control: AUTO
Port Auth Status: UNAUTHORIZED
Re-Authentication: Disable
Untagged VLAN id: None
Guest VLAN: Enable
Guest VLAN id: 10
Auth-Fail VLAN: Enable
Auth-Fail VLAN id: 11
Auth-Fail Max-Attempts: 3
Tx Period: 30 seconds
Quiet Period: 60 seconds
ReAuth Max: 2
Supplicant Timeout: 30 seconds
Server Timeout: 30 seconds
Re-Auth Interval: 3600 seconds
Max-EAP-Req: 2
Auth Type: SINGLE_HOST
Auth PAE State: Initialize
Backend State: Initialize
Force10#