Command Line Reference Guide

924 | Security
www.dell.com | support.dell.com
Table 1 describes the information in the show users command example.
Related
Commands
timeout login response
c e s
Specify how long the software will wait for login input (for example, user name and password) before
timing out.
Syntax
timeout login response seconds
To return to the default values, enter no timeout login response.
Parameters
Defaults
seconds = 300 seconds
Command Modes
LINE
Command
History
Usage
Information
The software measures the period of inactivity defined in this command as the period between
consecutive keystrokes. For example, if your password is “password” you can enter “p” and wait 29
seconds to enter the next letter.
Table 1 show users Command Example Fields
Field Description
(untitled) Indicates with a * which terminal line you are using.
Line Displays the terminal lines currently in use.
User Displays the user name of all users logged in.
Host(s) Displays the terminal line status.
Location Displays the IP address of the user.
username Enable a user.
seconds
Enter a number of seconds the software will wait before logging you out.
Range: 1 to 300.
Default: 300 seconds.
Version 8.3.5.0 Introduced on S55
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series