Command Line Reference Guide

Security | 917
Related
Commands
access-class
c e s
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
Defaults
Not configured.
Command Modes
LINE
Command
History
Related
Commands
enable password
c e s
Change the password for the enable command.
Syntax
enable password [level level] [encryption-type] password
To delete a password, use the no enable password [encryption-type] password [level level]
command.
Parameters
login authentication Apply an authentication method list to designated terminal lines.
password Create a password.
radius-server host Specify a RADIUS server host.
tacacs-server host Specify a TACACS+ server host.
access-list-name
Enter the name of an established IP Standard ACL.
Version 8.3.5.0 Introduced on S55
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.2.1.1 Introduced on E-Series
line Apply an authentication method list to designated terminal lines.
ip access-list standard Name (or select) a standard access list to filter based on IP address.
ip access-list extended Name (or select) an extended access list based on IP addresses or protocols.
level level (OPTIONAL) Enter the keyword level followed by a number as the level of
access.
Range: 1 to 15