Command Line Reference Guide

770 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
show ip pim neighbor
c e s
View PIM neighbors.
Syntax
show ip pim neighbor
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 27-4. show ip pim neighbor Command Example
DR Prio Displays the Designated Router priority value configured on the interface
(ip pim dr-priority command).
DR Displays the IP address of the Designated Router for that interface.
Table 27-1. show ip pim interface Command Example Fields
Field Description
Version 8.3.5.0 Introduced on S55
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series
Table 27-2. show ip pim neighbor Command Example Fields
Field Description
Neighbor address Displays the IP address of the PIM neighbor.
Interface List the interface type, with either slot/port information or ID (VLAN or
Port Channel), on which the PIM neighbor was found.
Uptime/expires Displays the amount of time the neighbor has been up followed by the
amount of time until the neighbor is removed from the multicast routing
table (that is, until the neighbor hold time expires).
Ver Displays the PIM version number.
• v2 = PIM version 2
DR prio/Mode Displays the Designated Router priority and the mode.
• 1 = default Designated Router priority (use ip pim dr-priority)
• DR = Designated Router
• S = source
Force10#show ip pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Prio/Mode
127.87.3.4 Gi 7/16 09:44:58/00:01:24 v2 1 / S
Force10#