Command Line Reference Guide

768 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
Command Modes
CONFIGURATION
Command
History
Usage
Information
This command configures an expiration timer for all S.G entries, unless they are assigned to an
Extended ACL.
ip pim spt-threshold
c e
Configure PIM router to switch to shortest path tree when the traffic reaches the specified threshold
value.
Syntax
ip pim spt-threshold value | infinity
To return to the default value, enter no ip pim spt-threshold.
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Usage
Information
This is applicable to last hop routers on the shared tree towards the Rendezvous Point (RP).
show ip pim bsr-router
c e s
View information on the Bootstrap router.
Syntax
show ip pim bsr-router
Command Modes
EXEC
EXEC Privilege
Command
History
Version 8.3.5.0 Introduced on S55
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced
Version 7.7.1.1 Introduced
value
(OPTIONAL) Enter the traffic value in kilobits per second.
Default: 10 packets per second. A value of zero (0) will cause a switchover on the first
packet.
infinity (OPTIONAL) To never switch to the source-tree, enter the keyword infinity.
Version 8.3.5.0 Introduced on S55
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on C-Series on port-channels and S-Series
Version 8.3.5.0 Introduced on S55
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series