Command Line Reference Guide

760 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
clear ip pim rp-mapping
c e s
Used by the bootstrap router (BSR) to remove all or particular Rendezvous Point (RP) Advertisement.
Syntax
clear ip pim rp-mapping rp-address
Parameters
Command Modes
EXEC Privilege
Command
History
clear ip pim tib
c e s
Clear PIM tree information from the PIM database.
Syntax
clear ip pim tib [group]
Parameters
Command Modes
EXEC Privilege
Command
History
debug ip pim
c e s
View IP PIM debugging messages.
Syntax
debug ip pim [bsr | events | group | packet [in | out] | register | state | timer [assert | hello |
joinprune | register]]
To disable PIM debugging, enter no debug ip pim, or enter undebug all to disable all debugging.
Parameters
rp-address
(OPTIONAL) Enter the RP address in dotted decimal format (A.B.C.D)
Version 8.3.5.0 Introduced on S55
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series
group
(OPTIONAL) Enter the multicast group address in dotted decimal format (A.B.C.D)
Version 8.3.5.0 Introduced on S55
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series
bsr (OPTIONAL) Enter the keyword bsr to view PIM Candidate RP/BSR
activities.
events (OPTIONAL) Enter the keyword events to view PIM events.
group (OPTIONAL) Enter the keyword group to view PIM messages for a specific
group.
packet [in | out] (OPTIONAL) Enter the keyword packet to view PIM packets. Enter one of the
optional parameters
• in: to view incoming packets
• out: to view outgoing packets.