Command Line Reference Guide

738 | Open Shortest Path First (OSPFv2 and OSPFv3)
www.dell.com | support.dell.com
Command
History
Example
Figure 26-9. Command Example: show ip ospf database external
Version 8.3.5.0 Introduced on S55
Version 7.8.1.0 Introduced support of Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
Table 26-5. Command Example Descriptions: show ip ospf process-id database
external
Item Description
LS Age Displays the LSA age.
Options Displays the optional capabilities available on router. The following options can
be found in this item:
• TOS-capability or No TOS-capability is displayed depending on whether the
router can support Type of Service.
• DC or No DC is displayed depending on whether the originating router can
support OSPF over demand circuits.
• E or No E is displayed on whether the originating router can accept AS
External LSAs.
LS Type Displays the LSA’s type.
Link State ID Displays the Link State ID.
Force10#show ip ospf 1 database external
OSPF Router with ID (20.20.20.5) (Process ID 1)
Type-5 AS External
LS age: 612
Options: (No TOS-capability, No DC, E)
LS type: Type-5 AS External
Link State ID: 12.12.12.2
Advertising Router: 20.31.3.1
LS Seq Number: 0x80000007
Checksum: 0x4cde
Length: 36
Network Mask: /32
Metrics Type: 2
TOS: 0
Metrics: 25
Forward Address: 0.0.0.0
External Route Tag: 43
LS age: 1868
Options: (No TOS-capability, DC)
LS type: Type-5 AS External
Link State ID: 24.216.12.0
Advertising Router: 20.20.20.8
LS Seq Number: 0x80000005
Checksum: 0xa00e
Length: 36
Network Mask: /24
Metrics Type: 2
TOS: 0
Metrics: 1
Forward Address: 0.0.0.0
External Route Tag: 701
Force10#