Command Line Reference Guide

ManualsBrandsDell ManualsserversDell Force10 S55T

701

702

703

704

705

706

707

708

709

710

Open Shortest Path First (OSPFv2 and OSPFv3) | 705

Command

History

Usage

Information

Only the routes within an area are summarized, and that summary is advertised to other areas by the

ABR. External routes are not summarized.

Commands

area stub

c e s

Configure a stub area, which is an area not connected to other areas.

Syntax

area area-id stub [no-summary]

To delete a stub area, enter no area area-id stub.

Parameters

Defaults

Disabled

Command Modes

ROUTER OSPF

Command

History

Usage

Information

Use this command to configure all routers and access servers within a stub.

Commands

Version 8.3.5.0 Introduced on S55

Version 7.8.1.0 Introduced support for Multi-Process OSPF.

Version 7.6.1.0 Introduced on S-Series

Version 7.5.1.0 Introduced on C-Series

pre-Version 6.1.1.1 Introduced on E-Series

area stub Create a stub area.

router ospf Enter the ROUTER OSPF mode to configure an OSPF instance.

area-id

Specify the stub area in dotted decimal format (A.B.C.D.) or enter a number from zero

(0) to 65535.

no-summary (OPTIONAL) Enter the keyword no-summary to prevent the ABR from sending

summary Link State Advertisements (LSAs) into the stub area.