Command Line Reference Guide

Multicast | 691
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 24-10. show ipv6 mroute mld all Command Example
show ipv6 mroute summary
e
Display a summary of the Multicast routing table.
Syntax
show ipv6 mroute summary
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
mld (OPTIONAL) Enter the keyword mld to display Multicast MLD
information.
group-address (OPTIONAL) Enter the multicast group address in the x:x:x:x::x format.
The :: notation specifies successive hexadecimal fields of zero.
all (OPTIONAL) Enter the keyword all to view all the MLD information.
vlan vlan-id
(OPTIONAL) Enter the keyword vlan followed by the VLAN ID to view
MLD VLAN information.
Version 7.4.1.0 Introduced
Force10#show ipv6 mroute mld all
MLD SNOOPING MRTM Table
(*, ff05:100::1), uptime 00:04:21
Incoming vlan: Vlan 200
Outgoing interface list:
GigabitEthernet 2/15
GigabitEthernet 2/16
(*, ff05:200::1), uptime 00:04:15
Incoming vlan: Vlan 200
Outgoing interface list:
GigabitEthernet 2/15
GigabitEthernet 2/16
(*, ff05:1100::1), uptime 00:04:18
Incoming vlan: Vlan 200
Outgoing interface list:
GigabitEthernet 2/15
GigabitEthernet 2/16
Force10#
Version 7.4.1.0 Introduced