Command Line Reference Guide

690 | Multicast
www.dell.com | support.dell.com
Example
Figure 24-7. show ipv6 mroute active Command Example
Example
Figure 24-8. show ipv6 mroute count group Command Examples
Example
Figure 24-9. show ipv6 mroute count source command Examples
show ipv6 mroute mld
e
Display the Multicast MLD information.
Syntax
show ipv6 mroute [mld [group-address | all | vlan vlan-id]]
Force10#show ipv6 mroute active 10
Active Multicast Sources - sending >= 10 pps
Group: ff05:300::1
Source: 165:87:31::30
Rate: 100 pps
Group: ff05:3300::1
Source: 165:87:31::30
Rate: 100 pps
Group: ff3e:300::4000:1
Source: 165:87:31::20
Rate: 100 pps
Group: ff3e:3300::4000:1
Source: 165:87:31::20
Rate: 100 pps
Force10#
Force10#show ipv6 mroute count group ff05:3300::1
IP Multicast Statistics
1 routes using 648 bytes of memory
1 groups, 1.00 average sources per group
Forwarding Counts: Pkt Count/Pkts per second
Group: ff05:3300::1, Source count: 1
Source: 165:87:31::30, Forwarding: 3997/0
Force10#
Force10#show ipv6 mroute count source 165:87:31::30
IP Multicast Statistics
2 routes using 1296 bytes of memory
2 groups, 1.00 average sources per group
Forwarding Counts: Pkt Count/Pkts per second
Group: ff05:300::1, Source count: 1
Source: 165:87:31::30, Forwarding: 3993/0
Group: ff05:3300::1, Source count: 1
Source: 165:87:31::30, Forwarding: 3997/0
Force10#