Command Line Reference Guide

Control and Monitoring | 69
Parameters
Command Modes
EXEC Privilege
Command
History
configure
c e s
Enter the CONFIGURATION mode from the EXEC Privilege mode.
Syntax
configure [terminal]
Parameters
Command Modes
EXEC Privilege
Command
History
Example
Figure 4-2. Command Example: configure
debug cpu-traffic-stats
c e s
Enable the collection of CPU traffic statistics.
Syntax
debug cpu-traffic-stats
To disable the debugging, execute the no debug cpu-traffic-stats command.
Defaults
Disabled
line-number
Enter a number for one of the 12 terminal lines on the system.
Range: 0 to 11.
aux 0 Enter the keywords aux 0 to reset the Auxiliary port.
Note: This option is supported on E-Series only.
console 0 Enter the keyword console 0 to reset the Console port.
vty number
Enter the keyword vty followed by a number to clear a Terminal line.
Range: 0 to 9
Version 8.3.5.0 Introduced on the S55.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
terminal (OPTIONAL) Enter the keyword terminal to specify that you are configuring from the
terminal.
Version 8.3.5.0 Introduced on the S55.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
Force10#configure
Force10(conf)#