Command Line Reference Guide

Multicast | 679

Multicast

Overview

The platforms on which a command is supported is indicated by the character — e for the E-Series,

c for the C-Series, and s for the S-Series — that appears below each command heading.

This chapter contains the following sections:

• IPv4 Multicast Commands

• IPv6 Multicast Commands

IPv4 Multicast Commands

The IPv4 Multicast commands are:

• clear ip mroute

• ip mroute

• ip multicast-lag-hashing

• ipv6 multicast-routing

• ip multicast-limit

• mac-flood-list

• mtrace

• queue backplane multicast

• restrict-flooding

• show ip mroute

• show ip rpf

• show queue backplane multicast

clear ip mroute

c e s

Clear learned multicast routes on the multicast forwarding table. To clear the PIM tree information

base, use clear ip pim tib command.

Syntax

clear ip mroute {group-address [source-address] | *}