Command Line Reference Guide

iSCSI Optimization | 603
------------------------------------------------
TCP Port Target IP Address
3260
860
Related
Commands
show iscsi session
Display information on active iSCSI sessions on the switch.
Syntax
show iscsi session
Command Mode
EXEC
EXEC Privilege
Command
History
Usage
Information
Only sessions observed by the switch will be learnt; sessions flowing through an adjacent switch will
not be learnt. Session monitoring learns sessions that actually flow through the switch, it does not learn
all sessions in the entire topology.
After a switch is reloaded, any information exchanged during the initial handshake is not available. If
the switch picks up the communication after reloading, it would detect a session was in progress but
could not obtain complete information for it. Any incomplete information of this type would not be
available in the “show” commands.
Example
FTOS# show isci session
Session 0:
-------------------------------------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
-------------------------------------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
Related
Commands
show iscsi session Display information on active iSCSI sessions on the switch.
show iscsi session detailed Display detailed information on active iSCSI sessions on the switch.
show run iscsi show run iscsi
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module
show iscsi Display the currently configured iSCSI settings.
show iscsi session detailed Display detailed information on active iSCSI sessions on the switch.
show run iscsi show run iscsi