Command Line Reference Guide

iSCSI Optimization | 599
19
iSCSI Optimization
Overview
Internet Small Computer System Interface (iSCSI) optimization enables quality-of-service (QoS)
treatment for iSCSI storage traffic on the following platforms as indicated: .
The following FTOS commands are used to configure and verify the iSCSI Optimization feature:
• iscsi aging time
• iscsi cos
• iscsi enable
• iscsi priority-bits
• iscsi profile-compellent
• iscsi target port
• show iscsi
• show iscsi session
• show iscsi session detailed
• show run iscsi
iscsi aging time
Set the aging time for iSCSI sessions.
Syntax
iscsi aging time time
To remove the iSCSI session aging time, use the no iscsi aging time command.
Parameters
Defaults
10 minutes.
Command Mode
CONFIGURATION
Command
History
time
Enter the aging time for the iSCSI session.
Range: 5 to 43,200 minutes.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module