Command Line Reference Guide

600 | IPv6 Basics
www.dell.com | support.dell.com
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 18-6. Command Example: show ipv6 route
Example
Figure 18-7. Command Example: show ipv6 route summary
all
(OPTIONAL) View information for all IPv6 routes
bgp
(OPTIONAL) View information for all IPv6 BGP routes
connected
(OPTIONAL) View only the directly connected IPv6 routes.
isis
(OPTIONAL) View information for all IPv6 IS-IS routes
list
(OPTIONAL) View the IPv6 prefix list
ospf
(OPTIONAL) View information for all IPv6 OSPF routes
rip
(OPTIONAL) View information for all IPv6 RIP routes
static
(OPTIONAL) View only routes configured by the ipv6 route command.
summary
(OPTIONAL) View a brief list of the configured IPv6 routes.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on C-Series and S=-Series
Version 7.4.1.0 Introduced
Force10#show ipv6 route
Codes: C - connected, L - local, S - static, R - RIP,
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
Gateway of last resort is not set
Destination Dist/Metric, Gateway, Last Change
-----------------------------------------------------
C 2001::/64 [0/0]
Direct, Gi 1/1, 00:28:49
C 2002::/120 [0/0]
Direct, Gi 1/1, 00:28:49
C 2003::/120 [0/0]
Direct, Gi 1/1, 00:28:49
C 2004::/32 [0/0]
Direct, Gi 1/1, 00:28:49
L fe80::/10 [0/0]
Direct, Nu 0, 00:29:09
Force10#show ipv6 route summary
Route Source Active Routes Non-active Routes
connected 5 0
static 0 0
Total 5 0
Total 5 active route(s) using 952 bytes