Command Line Reference Guide

598 | IPv6 Basics
www.dell.com | support.dell.com
show ipv6 fib stack-unit
s
View all Forwarding Information Base entries.
Syntax
show ipv6 fib stack-unit unit-number [summary] ipv6-address
Parameters
Command Mode
EXEC
EXEC Privilege
Command
History
show ipv6 interface
c e s
Display the status of interfaces configured for IPv6.
Syntax
show ipv6 interface interface [brief] [configured] [gigabitethernet slot | slot/port] [linecard
slot-number] [loopback interface-number] [port-channel number] [tengigabitethernet slot | slot/
port] [vlan vlan-id]
Parameters
slot-number
Enter the number of the stack unit.
Unit ID range:
S55: 0-11
all other S-Series: 0-7
summary (OPTIONAL) Enter the keyword summary to view a summary of entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have more
specific prefixes.
Range: /0 to /128
Note: The
:: notation specifies successive hexadecimal fields of zeros.
Version 8.3.5.0 Introduced on the S55.
Version 7.8.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced
interface
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Loopback interface, enter the keyword
Loopback followed by a
number from 0 to 16383.
• For the Null interface, enter the keyword
null followed by zero (0).
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
brief
(OPTIONAL) View a summary of IPv6 interfaces.
configured
(OPTIONAL) View information on all IPv6 configured interfaces
gigabitethernet
(OPTIONAL) View information for an IPv6 gigabitethernet interface.
linecard slot-number
(OPTIONAL) View information for a specific IPv6 line card or S-Series
stack-unit
Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300.
Range: 0-7 for C-Series
Range 0-11 for S55, 0-7 for all other S-Series