Command Line Reference Guide

596 | IPv6 Basics
www.dell.com | support.dell.com
Usage
Information
The forwarding table displays host route first, then displays route originated by routing protocol
including static route.
The egress port section displays the egress port of the forwarding entry which is designated as:
C for the Control Processor
1 for the Route Processor 1
2 for the Route Processor 2
Examples
Figure 18-3. Command Example: show ipv6 cam linecard fib (C or E-Series)
Figure 18-4. Command Example: show ipv6 cam linecard (C or E-Series)
show ipv6 cam stack-unit
s
Displays the IPv6 CAM entries for the specified stack-unit.
Syntax
show ipv6 cam stack-unit unit-number port-set {0-1} [summary | index | ipv6 address]
Force10#show ipv6 cam linecard 13 fib
Neighbor Mac-Addr Port VId
---------------------------------------------- ----------------- --------- ----
[ 31] 2002:44:1:1::11 00:00:01:1a:1e:d5 Gi 13/2 0
Prefix Next-Hop Mac-Addr Port VId EC
------------------------------- ------------------------------- ----------------- --------- ---- --
[ 3147] 100::/64 [ 0] 2002:44:1:1::11 - Gi 0/0 0 1
[ 0] 2002:44:1:24::11 - Gi 0/0 0 1
[ 0] 2002:44:1:23::11 - Gi 0/0 0 1
[ 0] 2002:44:1:21::11 - Gi 0/0 0 1
[ 0] 2002:44:1:20::11 - Gi 0/0 0 1
[ 0] 2002:44:1:19::11 - Gi 0/0 0 1
Force10#
Force10#show ipv6 cam linecard 1 port-set 0
Neighbor Mac-Addr Port VId
--------------------------------------------------- ----------------- --------- ----
[ 0] fe80::201:e8ff:fe17:5cae 00:01:e8:17:5c:ae BLK 100
[ 1] fe80::201:e8ff:fe17:5bbe 00:01:e8:17:5b:be BLK 0
[ 2] fe80::201:e8ff:fe17:5bbd 00:01:e8:17:5b:bd BLK 0
[ 3] fe80::201:e8ff:fe17:5cb0 00:01:e8:17:5c:b0 BLK 0
[ 4] fe80::201:e8ff:fe17:5cae 00:01:e8:17:5c:ae BLK 1000
[ 5] fe80::201:e8ff:fe17:5caf 00:01:e8:17:5c:af BLK 0
Prefix First-Hop Mac-Addr Port VId EC
------------------------------------ ------------------------ ----------------- --------- ----
--
[ 80] 2222::2/128 [ 2] : 00:00:00:00:00:00 RP2 0 0
[ 81] 3333::2/128 [ 2] ::1 00:00:00:00:00:00 RP2 0 0
Force10#