Command Line Reference Guide

File Management | 59
Related
Commands
0Usage
Information
On E-Series ExaScale, you cannot upgrade SFMs using this command when Cache Boot is configured.
If you attempt an upgrade, you must reload the chassis to recover.
upgrade fpga-image (C-Series)
c
Upgrade the primary FPGA image.
Syntax
upgrade fpga-image {rpm {number | all}| linecard {number | all} [system-fpga | link-fpga] |
all} {booted | file-url}
Parameters
Defaults
None.
Command Mode
EXEC Privilege
Command
History
show sfm Display the SFM status.
upgrade (E-Series version)
Upgrade the E-Series.
rpm number Enter rpm followed by the RPM slot number to upgrade an RPM FPGA
Range: 0-1
linecard number Enter linecard followed by the line card slot number to upgrade a
linecard FPGA.
Range: 0-7 on the C300, 0-3 on the C150
all Enter the keyword all to upgrade all RPM and linecard FPGAs. Enter the
keyword
all after the keyword rpm to upgrade all FPGAs on all RPMs.
Enter the keyword
all after the keyword linecard to upgrade all FPGAs
on all linecards.
system-fpga (OPTIONAL) Enter system-fpga to upgrade only the system FPGA on a
fiber linecard. Contact the Dell Force10 TAC before using this keyword.
link-fpga (OPTIONAL) Enter link-fpga to upgrade only the link FPGA on a fiber
linecard. Contact the Dell Force10 TAC before using this keyword.
booted
Upgrade the FPGA image using the currently running FTOS image.
file-url
Enter the following location keywords and information to upgrade the
FPGA using an FTOS image other than the one currently running:
• To specify an FTOS image on the internal flash, enter
flash://
file-path/filename.
• To specify an FTOS image on an FTP server, enter
ftp://
user:password@hostip/filepath
• To specify an FTOS image on the external flash on the primary RPM,
slot0://file-path/filename
• To copy a file on a TFTP server, enter tftp://hostip/filepath/
filename
Version 7.7.1.0
Renamed the
primary-fpga-flash keyword to fpga-image. Added support for
upgrading using a remote FTOS image.
Version 7.6.1.0
Added support for the
all keyword
Version 7.5.1.0 Introduced on C-Series