Command Line Reference Guide

ManualsBrandsDell ManualsserversDell Force10 S55T

581

582

583

584

585

586

587

588

589

590

586 | IPv6 Access Control Lists (IPv6 ACLs)

www.dell.com | support.dell.com

Example

The following example shows the output shown when using the test cam-usage command.

Figure 17-8. Command Example: test cam-usage (C-Series)

IPv6 Route Map Commands

The following commands allow you to configure route maps and their redistribution criteria.

• match ipv6 address

• match ipv6 next-hop

• match ipv6 route-source

• route-map

Table 17-3. Output Explanations: test cam-usage

Term Explanation

Linecard

Lists the line card or line cards that are checked. Entering

all shows

the status for line cards in the chassis

Portpipe Lists the portpipe (port-set) or port pipes (port-sets) that are checked.

Entering all shows the status for line cards and port-pipes in the

chassis.

CAM Partition Shows the CAM profile of the CAM

Available CAM Identifies the amount of CAM space remaining for that profile

Estimated CAM per Port Estimates the amount of CAM space the listed policy will require.

Status Indicates whether or not the policy will be allowed in the CAM

Force10#test cam-usage service-policy input LauraMapTest linecard all

------------------------------------------------------------------------------------------

2 | 1 | IPv4Flow | 232 | 0 | Allowed

2 | 1 | IPv6Flow | 0 | 0 | Allowed

4 | 0 | IPv4Flow | 232 | 0 | Allowed

4 | 0 | IPv6Flow | 0 | 0 | Allowed

Force10#

Force10#test cam-usage service-policy input LauraMapTest linecard 4 port-set 0

------------------------------------------------------------------------------------------

4 | 0 | IPv4Flow | 232 | 0 | Allowed

4 | 0 | IPv6Flow | 0 | 0 | Allowed

Force10#

Force100#test cam-usage service-policy input LauraMapTest linecard 2 port-set 1

------------------------------------------------------------------------------------------

2 | 1 | IPv4Flow | 232 | 0 | Allowed

2 | 1 | IPv6Flow | 0 | 0 | Allowed

Force10#