Command Line Reference Guide

ManualsBrandsDell ManualsserversDell Force10 S55T

58 | File Management

www.dell.com | support.dell.com

Usage

Information

You must reload FTOS after executing this command. Use the command upgrade system stack-unit

(S-Series stack member) on page 242 to copy FTOS from the management unit to one or more stack

members.

upgrade fpga-image (E-Series)

Upgrade the FPGA version in the specified E-Series SFM and automatically initiate an automatic reset

to complete the version upgrade.

Syntax

upgrade fpga-image {sfm} {all | id} [booted | flash:// | ftp: |slot0: | tftp]

Parameters

Defaults

No default values or behavior

Command Modes

EXEC Privilege

Command

History

Example

Command example: upgrade sfm autoreset

Force10#upgrade system ?

ftp: Copy from remote file system (ftp://userid:password@hostip/filepath)

scp: Copy from remote file system (scp://userid:password@hostip/filepath)

tftp: Copy from remote file system (tftp://hostip/filepath)

Force10#$pgrade system ftp://username:password@10.11.1.1/FTOS-SB-7.7.1.0.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!

Erasing Sseries ImageUpgrade Table of Contents, please wait

.!..................................................................................................

....................................................................................................

....................................!

12946259 bytes successfully copied

Force10#reload

sfm Enter the keyword sfm to upgrade the FPGA on the SFMs.

rpm Enter the keyword rpm to upgrade all processors on the RPM.

all Enter the keyword all to upgrade the FPGA on all the SFMs.

id Enter the keyword id to upgrade the FPGA on all a specific SFM.

Enter the path to the upgrade source. Entering <CR> updates the FPGA from the flash.

Version 8.3.1.0

Added

rpm option

Version 7.5.1.0 Introduced on E-Series

Force10#upgrade sfm 1 autoreset

SFM1: upgrade in progress

!!! !!! !!!

SFM1: upgrade complete

SFM1 is active. Resetting it might temporarily impact traffic.

Proceed with reset [confirm yes/no]: yes

Force10#