Command Line Reference Guide

56 | File Management
www.dell.com | support.dell.com
Parameters
Defaults
FTOS uses the boot flash image that was packed with it if no URL is specified.
Command Modes
EXEC Privilege
Command
History
Usage
Information
A system message appears stating the Bootflash upgrade status. Reload the system to boot from the
upgraded boot images.
bootflash-image Enter the keyword bootflash-image to upgrade the bootflash image.
bootselector-image Enter the keyword bootselector-image to upgrade the boot selector
image. Use with TAC supervision only.
system-image Enter the keyword system-image to upgrade the system image. Use
with TAC supervision only.
all Enter the keyword all to upgrade the bootflash or boot selector image on
all processors. This keyword does not upgrade the bootflash on the standby
RPM.
Enter the keyword
all after the keyword linecard to upgrade the
bootflash or boot selector image on all linecards.
linecard number
rpm Enter the keyword rpm to upgrade the system image of a selector image
on all processors on the RPM.
repair
Enter this keyword to upgrade a line card newly inserted into an already
upgraded chassis. This option is only available with the
system-image
keyword.
booted
Upgrade the bootflash or bootselector image using the currently running
FTOS image.
file-url
Enter the following location keywords and information to upgrade using an
FTOS image other than the one currently running:
• To specify an FTOS image on the internal flash, enter
flash://
file-path/filename.
• To specify an FTOS image on an FTP server, enter
ftp://
user:password@hostip/filepath
• To specify an FTOS image on the external flash on the primary RPM,
slot0://file-path/filename
• To copy a file on a TFTP server, enter tftp://hostip/filepath/
filename
Version 7.7.1.0 Introduced system-image option
Version 7.5.1.0 Introduced on C-Series
E-Series original Command