Command Line Reference Guide

IPv4 Routing | 551
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 16-20. show ip route all Command Example
protocol
(OPTIONAL) Enter the name of a routing protocol (bgp, isis, ospf, rip) or
the keywords
connected or static.
bgp, isis, ospf, rip are E-Series-only options.
If you enter
bgp, you can include the BGP as-number. (E-Series only)
If you enter
isis, you can include the ISIS routing-tag. (E-Series only)
If you enter
ospf, you can include the OSPF process-id.
process-id
(OPTIONAL) Specify that only OSPF routes with a certain process ID must be
displayed.
routing-tag
(OPTIONAL) Specify that only ISIS routes with a certain routing tag must be
displayed.
connected (OPTIONAL) Enter the keyword connected to view only the directly
connected routes.
all (OPTIONAL) Enter the keyword all to view both active and non-active routes.
static (OPTIONAL) Enter the keyword static to view only routes configured by the
ip route command.
summary (OPTIONAL) Enter the keyword summary. See show ip route summary.
Version 8.3.5.0 Introduced on the S55.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.9.1.0 Introduced VRF on the E-Series
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.0 Introduced for E-Series
Force10#show ip route all
Codes: C - connected, S - static, R - RIP
B - BGP, IN - internal BGP, EX - external BGP, LO - Locally Originated
O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default
> - non-active route + - summary route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
----------- ------- ----------- -----------
R 3.0.0.0/8 via 100.10.10.10, So 2/8 120/1 00:07:12
via 101.10.10.10, So 2/9
C 100.10.10.0/24 Direct, So 2/8 0/0 00:08:54
> R 100.10.10.0/24 Direct, So 2/8 120/0 00:08:54
C 101.10.10.0/24 Direct, So 2/9 0/0 00:09:15
> R 101.10.10.0/24 Direct, So 2/9 120/0 00:09:15
Force10#