Command Line Reference Guide

46 | File Management
www.dell.com | support.dell.com
Example
Command output example (E-Series): show linecard boot-information
show os-version
ces
Display the release and software image version information of the image file specified or, optionally,
the image loaded on the RPM (C-Series and E-Series only).
Syntax
show os-version [file-url]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
Usage
Information
Force10#show linecard boot-information
-- Line cards --
Serial Booted Next Cache
Boot
# Status CurType number from boot boot
flash
-------------------------------------------------------------------------
--------------------------------------
0 -
1 -
2 -
3 online E48TF FX000032632 4.7.7.171 4.7.7.171 A: invalid B:
invalid A: 2.3.2.1 [b] B: 2.3.2.1
4 -
5 -
6 -
Force10#
file-url
(OPTIONAL) Enter the following location keywords and information:
• For a file on the internal Flash, enter
flash:// followed by the filename.
• For a file on an FTP server, enter
ftp://user:password@hostip/filepath
• For a file on the external Flash, enter slot0:// followed by the filename.
• For a file on a TFTP server, enter
tftp://hostip/filepath
Note: ftp and tftp are the only S-Series options.
Version 8.3.5.0 Introduced on the S55.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
Note: A filepath that contains a dot ( . ) is not supported.