Command Line Reference Guide

446 | Interfaces
www.dell.com | support.dell.com
Example
Figure 15-1. clear counters Command Example
Related
Commands
clear dampening
c e s
Clear the dampening counters on all the interfaces or just the specified interface.
Syntax
clear dampening [interface]
Parameters
Defaults
Without a specific interface specified, the command clears all interface dampening counters
Command Modes
EXEC Privilege
Command
History
Example
Related
Commands
Force10#clear counters
Clear counters on all interfaces [confirm]
mac learning-limit Allow aging of MACs even though a learning-limit is configured or disallow
station move on learnt MACs.
show interfaces Displays information on the interfaces.
interface
(Optional) Enter one of the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a port channel interface, enter the keyword
port-channel
followed by a number:
C-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale and ExaScale
• For a SONET interface, enter the keyword
sonet followed by the slot/
port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
Version 8.3.5.0 Introduced on the S55.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series
Force10#clear dampening gigabitethernet 1/2
Clear dampening counters on Gi 1/2 [confirm] y
Force10#
show interfaces dampening
Display interface dampening information.
dampening Configure dampening on an interface.