Command Line Reference Guide

GARP VLAN Registration (GVRP) | 423
show garp timers
c e s
Display the GARP timer settings for sending GARP messages.
Syntax
show garp timers
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 13-1. show garp timers Command Example
Related
Commands
show gvrp
c e s
Display the GVRP configuration.
Syntax
show gvrp [brief | interface]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Version 8.3.5.0 Introduced on the S55.
Version 7.6.1.0 Introduced on C, E, and S-Series
Force10#show garp timers
GARP Timers Value (milliseconds)
----------------------------------------
Join Timer 200
Leave Timer 600
LeaveAll Timer 10000
Force10#
garp timers Set the intervals (in milliseconds) for sending GARP messages.
brief (OPTIONAL) Enter the keyword brief to display a brief summary of the GVRP
configuration.
interface
(OPTIONAL) Enter the following keywords and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the
slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed
by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel followed by the
Port Channel number:
C-Series and S-Series Range: 1-128
E-Series Range: 1-255 for TeraScale
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.