Command Line Reference Guide

422 | GARP VLAN Registration (GVRP)
www.dell.com | support.dell.com
Usage
Information
The fixed registration prevents an interface, configured via the command line to belong to a VLAN
(static configuration), from being un-configured when it receives a Leave message. Therefore, the
registration mode on that interface is fixed.
The normal registration is the default registration. The port’s membership in the VLANs depends on
GVRP. The interface becomes a member of VLANs after learning about the VLAN through GVRP. If
the VLAN is removed from the port that sends GVRP advertisements to this device, then the port will
stop being a member of the VLAN.
The forbidden is used when you do not want the interface to advertise or learn about VLANs through
GVRP.
Related
Commands
protocol gvrp
c e s
Access GVRP protocol — (config-gvrp)#.
Syntax
protocol gvrp
Defaults
Disabled
Command Modes
CONFIGURATION
Command
History
Related
Commands
show config
c e s
Display the global GVRP configuration.
Syntax
show config
Command Modes
CONFIGURATION-GVRP
Command
History
Related
Commands
show gvrp Display the GVRP configuration including the registration
Version 8.3.5.0 Introduced on the S55.
Version 7.6.1.0 Introduced on C, E, and S-Series
disable Globally disable GVRP.
Version 8.3.5.0 Introduced on the S55.
Version 7.6.1.0 Introduced on C, E, and S-Series
gvrp enable Enable GVRP on physical interfaces and LAGs.
protocol gvrp Access GVRP protocol.