Command Line Reference Guide

412 | Dell Force10 Resilient Ring Protocol (FRRP)
www.dell.com | support.dell.com
Defaults
Disabled
Command Modes
CONFIGURATION (conf-frrp)
Command
History
interface
c e s
Configure the primary, secondary, and control-vlan interfaces.
Syntax
interface {primary interface secondary interface control-vlan vlan-id}
To return to the default, use the no interface {primary interface secondary interface control-vlan
vlan-id} command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-frrp)
Command
History
Version 8.3.5.0 Introduced on the S55.
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
primary interface
Enter the keyword primary to configure the primary interface followed by one of
the following interfaces and slot/port information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by
the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For Port Channel interface types, enter the keyword
port-channel followed
by a number from 1 to 255.
• For a SONET interface, enter the keyword
sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
secondary
interface
Enter the keyword secondary to configure the secondary interface followed by
one of the following interfaces and slot/port information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by
the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For Port Channel interface types, enter the keyword
port-channel followed
by a number from 1 to 255.
• For a SONET interface, enter the keyword
sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
control-vlan
vlan-id
Enter the keyword control-vlan followed by the VLAN ID.
Range: 1 to 4094
Version 8.3.5.0 Introduced on the S55.