Command Line Reference Guide

Content Addressable Memory (CAM) | 393
Figure 10-10. Command Example: test cam-usage (S-Series)
Table 10-2. Output Explanations: test cam-usage (S-Series)
Term Explanation
Stack-Unit
Lists the stack unit or units that are checked. Entering
all shows the
status for all stacks.
Portpipe Lists the portpipe (port-set) or port pipes (port-sets) that are checked.
Entering all shows the status for linecards and port-pipes in the
chassis.
CAM Partition Shows the CAM profile of the CAM
Available CAM Identifies the amount of CAM space remaining for that profile
Estimated CAM per Port Estimates the amount of CAM space the listed policy will require.
Status Indicates whether or not the policy will be allowed in the CAM
Force10#test cam-usage service-policy input LauraIn stack-unit all
Stack-Unit | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status
------------------------------------------------------------------------------------------
0 | 0 | IPv4Flow | 102 | 0 | Allowed
0 | 1 | IPv4Flow | 102 | 0 | Allowed
Force10#
!
Force10#test cam-usage service-policy input LauraIn stack-unit 0 port-set 1
Stack-Unit | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status
------------------------------------------------------------------------------------------
0 | 1 | IPv4Flow | 102 | 0 | Allowed
Force10#