Command Line Reference Guide

30 | File Management
www.dell.com | support.dell.com
Command Modes
CONFIGURATION
Command
History
Usage
Information
To display these changes in the show bootvar command output, you must save the running
configuration to the startup configuration (using the copy command) and reload system.
Related
Commands
boot system gateway
c e
Specify the IP address of the default next-hop gateway for the management subnet.
Syntax
boot system gateway ip-address
To delete a gateway configuration, enter no boot system gateway.
Parameters
Command Modes
CONFIGURATION
Usage
Information
Saving the address to the startup configuration file preserves the address in NVRAM in case the startup
configuration file is deleted.
Command
History
Related
Commands
cd
c e s
Change to a different working directory.
Syntax
cd directory
Parameters
Command Modes
EXEC Privilege
Command
History
Version 8.3.5.0 Introduced on the S55
boot system gateway Specify the IP address of the default next-hop gateway for the management
subnet.
ip-address
Enter an IP address in dotted decimal format.
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
change bootflash-image Change the primary, secondary, or default boot image configuration.
directory
(OPTONAL) Enter one of the following:
•
flash: (internal Flash) or any sub-directory
•
slot0: (external Flash) or any sub-directory (C-Series and E-Series only)
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command