Command Line Reference Guide

Border Gateway Protocol IPv4(BGPv4) | 285
Related
Commands
Command
History
clear ip bgp peer-group
c e s
Reset a peer-group’s BGP sessions.
Syntax
clear ip bgp peer-group peer-group-name
Parameters
Command Modes
EXEC Privilege
Command
History
clear ip bgp dampening
c e s
Clear information on route dampening and return suppressed route to active state.
Syntax
clear ip bgp dampening [ip-address mask]
Parameters
Command Modes
EXEC Privilege
Usage
Information
After you enter this command, the software deletes history routes and returns suppressed routes to
active state.
Command
History
bgp recursive-bgp-next-hop Disable next-hop resolution through other routes learned by BGP
bgp soft-reconfig-backup Turn on BGP Soft Reconfiguration
Version 8.3.5.0 Introduced on the S55.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 6.5.1.0
Expanded to include the
as-number option
peer-group-name
Enter the peer group name to reset the BGP sessions within that peer group.
Version 8.3.5.0 Introduced on the S55.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ip-address mask
(OPTIONAL) Enter an IP address in dotted decimal format and the prefix mask
in slash format (/x) to clear dampening information only that BGP neighbor.
Version 8.3.5.0 Introduced on the S55.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series