Command Line Reference Guide

284 | Border Gateway Protocol IPv4(BGPv4)
www.dell.com | support.dell.com
capture bgp-pdu max-buffer-size
c e s
Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
Defaults
40960000 bytes.
Command Modes
EXEC Privilege
Related
Commands
Command
History
clear ip bgp
c e s
Reset BGP sessions on the E-Series. The soft parameter (BGP Soft Reconfiguration) clears the policies
without resetting the TCP connection.
Syntax
clear ip bgp * | as-number | ip-address [flap-statistics | soft [in | out]]
Parameters
Command Modes
EXEC Privilege
100-102400000
Enter a size for the capture buffer.
capture bgp-pdu neighbor Enable capture of an IPv4 BGP neighbor packet.
show capture bgp-pdu neighbor Display BGP packet capture information for an IPv6 address on the
E-Series.
Version 8.3.5.0 Introduced on the S55.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.5.1.0 Introduced
* Enter an asterisk ( * ) to reset all BGP sessions.
as-number Enter the AS number to reset all neighbors belonging to that AS.
Range: 0-65535 (2-Byte)
or
1-4294967295 (4-Byte)
or
0.1-65535.65535 (Dotted format)
ip-address
Enter an IP address in dotted decimal format to reset all prefixes from that
neighbor.
flap-statistics (OPTIONAL) Enter the keyword flap-statistics to reset the flap statistics
on all prefixes from that neighbor.
soft (OPTIONAL) Enter the keyword soft to configure and activate policies
without resetting the BGP TCP session, that is, BGP Soft Reconfiguration.
Note: If you enter clear ip bgp ip-address soft, both inbound and
outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound policies.