Command Line Reference Guide

170 | S55 u-Boot
www.dell.com | support.dell.com
nvram
Clear the NVRAM either by copying it to the MMC, or by erasing it entirely.
Syntax
nvram [dump | erase]
Parameters
Defaults
None
Command Modes
uBoot
Command
History
printenv
Display the current system boot variable and other system settings.
Syntax
printenv
Command Modes
uBoot
Command
History
dump
Copy the NVRAM to the MMC.
erase
Erase the NVRAM contents. This command sets the MVRAM partition bits
to 1.
Version 8.3.5.1 Introduced on the S55.
Version 8.3.5.0 Introduced on the S55.