Command Line Reference Guide

Control and Monitoring | 155
Defaults
No default behavior or values
Command Modes
CONFIGURATION
Command
History
Related
Commands
write
c e s
Copy the current configuration to either the startup-configuration file or the terminal.
Syntax
write {memory | terminal}
Parameters
Command Modes
EXEC Privilege
Command
History
Related
Commands
Usage
Information
The write memory command saves the running-configuration to the file labeled
startup-configuration. When using a LOCAL CONFIG FILE other than the startup-config not named
“startup-configuration” (for example, you used a specific file during the boot config command) the
running-config is not saved to that file; use the copy command to save any running-configuration
changes to that local file.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
ip address Assign a primary and secondary IP address to the interface.
memory Enter the keyword memory to copy the current running configuration to the startup
configuration file. This command is similar to the
copy running-config
startup-config
command.
terminal Enter the keyword terminal to copy the current running configuration to the terminal. This
command is similar to the
show running-config command.
Version 8.3.5.0 Introduced on the S55.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
save
Save configurations created in uBoot.