Command Line Reference Guide

Control and Monitoring | 149
Example
Figure 4-63. Command Example: traceroute (IPv6)
Related
Commands
undebug all
c e s
Disable all debug operations on the system.
Syntax
undebug all
Defaults
No default behavior or values
Command Modes
EXEC Privilege
Command
History
upload trace-log
c e
Upload trace log files from the three CPUs (cp, rp1, and rp2)
Syntax
upload trace-log {cp {cmd-history | hw-trace | sw-trace}| rp1 {cmd-history | hw-trace |
sw-trace}| rp2 {cmd-history | hw-trace | sw-trace}}
Parameters
Force10#traceroute 100::1
Type Ctrl-C to abort.
-----------------------------------------------------------
Tracing the route to 100::1, 64 hops max, 60 byte packets
-----------------------------------------------------------
Hops Hostname Probe1 Probe2 Probe3
1 100::1 000.000 ms 000.000 ms 000.000 ms
Force10#traceroute 3ffe:501:ffff:100:201:e8ff:fe00:4c8b
Type Ctrl-C to abort.
-----------------------------------------------------------------------------------------
Tracing the route to 3ffe:501:ffff:100:201:e8ff:fe00:4c8b, 64 hops max, 60 byte packets
-----------------------------------------------------------------------------------------
Hops Hostname Probe1 Probe2 Probe3
1 3ffe:501:ffff:100:201:e8ff:fe00:4c8b
000.000 ms 000.000 ms 000.000 ms
Force10#
ping Test connectivity to a device.
Version 8.3.5.0 Introduced on the S55.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
cp | rp1 | rp2 Enter the keyword cp | rp1 | rp2 to upload the trace log from that CPU.
cmd-history (OPTIONAL) Enter the keyword cmd-history to upload the CPU’s
command history.