Command Line Reference Guide

136 | Control and Monitoring
www.dell.com | support.dell.com
Example
Figure 4-57. Command Example: show system stack-unit (S55)
Related
Commands
Force10#show system stack-unit 0
-- Unit 0 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : S55 - 48-port E/FE/GE (SC)
Current Type : S55 - 48-port E/FE/GE (SC)
Master priority : 0
Hardware Rev : 2.0
Num Ports : 52
Up Time : 2 hr, 16 min
FTOS Version : 1-2-0-205
Jumbo Capable : yes
POE Capable : no
Boot Flash : 1.0.0.2
Memory Size : 2147483648 bytes
Temperature : 50C
Voltage : ok
Serial Number : 00AS101900013
Part Number : 7520044101 Rev 02
Vendor Id : 11
Date Code : 01192010
Country Code : 01
Last Restart : soft reset
Auto Reboot : disabled
Burned In MAC : 00:01:e8:81:e1:b9
No Of MACs : 3
-- Module 0 --
Status : not present
-- Module 1 --
Status : not present
-- Power Supplies --
Unit Bay Status Type
---------------------------------------------------------------------------
0 0 up AC
0 1 up AC
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed Fan2 Speed Temp
--------------------------------------------------------------------------------
0 0 up up 7200 up 7200 up 7200 20
0 1 up up 7200 up 7200 up 7200 21
Speed in RPM
Force10#
show version Display the FTOS version.
show processes memory
(S-Series)
Display memory usage based on running processes.
show system stack-ports Display information about the stack ports on all switches in the S-Series
stack.
show hardware stack-unit Display the data plane and management plane input and output statistics of
a particular stack member.
stack-unit priority Configure the ability of an S-Series switch to become the management unit
of a stack.