Command Line Reference Guide

Control and Monitoring | 131
show software ifm
c s
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface | stack-unit unit-ID |
trace-flags}
Parameters
Defaults
None
Command Mode
EXEC
EXEC Privilege
Command
History
clients Enter the keyword clients to display IFM client information.
summary
(OPTIONAL) Enter the keyword summary to display brief information about IFM
clients.
ifagt number Enter the keyword ifagt followed by the number of an interface agent to display
software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb followed by one of the following interface IDs followed by the
slot/port information to display interface control block information for that interface:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet.
• For a Port Channel interface, enter the keyword
port-channel.
(Range:1– 128)
• For a 10G Ethernet interface, enter the keyword
TenGigabitEthernet.
C-Series options also include:
• fastethernet for a Fast Ethernet interface
•
loopback for a Loopback interface
•
managementethernet for a Management Ethernet interface
•
null for a Null interface
•
vlan for a VLAN interface (Range: 1–4094, 1-2094 for ExaScale)
stack-unit
unit-ID
Enter the keyword stack-unit followed by the stack member number to display IFM
information for that unit.
Unit ID range:
S55: 0-11
all other S-Series: 0-7
Note: This option is only available on S-Series.
trace-flags
Enter the keyword trace-flags to display IFM information for internal trace
flags.
Version 8.3.5.0 Introduced on the S55.
Version 7.6.1.0 Introduced for C-Series and S-Series