Command Line Reference Guide

Control and Monitoring | 129
E-Series Example
Figure 4-52. Command Example: show rpm on E-Series
Table 4-7 defines the fields displayed in Figure 4-52.
Table 4-7. Descriptions of show rpm output
Field Description
Status Displays the RPM’s status.
Next Boot Displays whether the RPM is to be brought online at the next system reload.
Card Type Displays the RPM catalog number.
Hardware Rev Displays theE-Series chipset hardware revision level: 1.0 (non-Jumbo); 1.5
(Jumbo-enabled); 2.0 (or above is TeraScale).
Num Ports Displays the number of active ports.
Up Time Displays the number of hours and minutes since the RPM’s last reboot.
Last Restart States the reason for the last RPM reboot.
C-Series possible values:
• “normal power-cycle” (
reset power-cycle command)
• “reset by master” (peer RPM reset by master RPM)
• “over temperature shutdown”
• “power supply failed”
E-Series possible values:
• “normal power-cycle” (insufficient power, normal power cycle)
• “reset by user” (automatic failover, software reload of both RPMs, or
master RPM resetting peer)
• “force-failover” (
redundancy force-failover command)
FTOS Version Displays the operating software version.
FTOS#show RPM 0
-- RPM card 0 --
Status : active
Next Boot : online
Card Type : RPM - Route Processor Module (LC-EH-RPM)
Hardware Rev : 3.1
Num Ports : 1
Up Time : 18 hr, 48 min
Last Restart : reset by user
FTOS Version : 8-4-1-317
Jumbo Capable : yes
CP Boot Flash : A: 2.5.1.0 [booted] B: 2.5.1.0
RP1 Boot Flash: A: 2.5.1.0 [booted] B: 2.5.1.0
RP2 Boot Flash: A: 2.5.1.0 [booted] B: 2.5.1.0
CP Mem Size : 1073741824 bytes
RP1 Mem Size : 1073741824 bytes
RP2 Mem Size : 1073741824 bytes
MMC Mem Size : 3566329856 bytes
External MMC : 128180224 bytes
USB Mem Size : n/a
Temperature : 36C
Power Status : AC
Voltage : ok
Serial Number : FX000056234
Part Number : 7520043401 Rev 05
Vendor Id : 04
Date Code : 01072010
Country Code : 01
Piece Part ID : N/A
PPID Revision : N/A
Service Tag : N/A
Expr Svc Code : N/A
FTOS#